🌟M14 Diamond Drill Bits – Premium Set of 4 Hole Saws (6MM & 8MM)🌟

🌟**Discover the M14 – Set of 4 hole saws in 6MM, 8MM Diamond drill bits!**🌟

🔹**Unsurpassed Quality:** Our production method, representing the highest quality available, ensures a significantly extended lifetime for the drill bits.

🔹**Advanced Technology:** With our vacuum brazed technology, the drill bits can withstand higher temperatures in cutting through the hardest materials. Perfect for granite, ceramic, marble and more!

🔹**Boring effect:**Diamond drilling is integrated with melting during drilling for optimal drilling. For additional cooling, use our specially designed WAX Paint and Tile.

🔹**Simple Use:** Instructions for all team members.

🔹**High-speed drilling:** Our diamond bits with vacuum soldering technology quickly cut even the toughest materials.

🔹**Versatility:** Designed for drilling holes in steel, granite, marble, ceramic and natural stone.

🔹**Product details:** The cube contains 2pcs #6mm and 2pcs #8mm diamond hole saws, all packed in a stylish aluminum case.

🔹**Warranty:** We stand behind the quality of our products. If you face any challenges or are not satisfied, we offer a hassle-free replacement or full refund.

🔹**Don’t miss the chance to experience the best drill bit on the market. Invest in quality, precision and durability with the M14 – Set of 4 hole saws in 6MM, 8MM Diamond Drill Bits!**

 

 

Steps to drill clean and accurate holes:

 

1. Start drilling the hole at an angle of approx.45 degrees to the surface, so the drill has a chance to start and prevents the drill from slipping

2. Slowly move the bit to a more upright position and swing the bit in a circular motion

3. No need to apply much pressure, let the bit do the work, you will feel the bit break through the back of the glass or tile when the hole is finished

4. Be careful when using them, as they can become shiny and burn out if used too quickly

 

 

Recommendations for a long crown life:
dry drilling, with wax
By using an angle grinder with speed control,
Circular movements are recommended when drilling – this will ensure better cooling,
Side valves should be cleaned and checked every time before drilling,
The maximum operating speed is 11,000 rpm. To extend the life of the drill bit and the accuracy of drilled holes, do not exceed the max. speed.