🔹 **Superior Quality:** Our production method represents the highest quality in the industry, ensuring a significantly extended lifespan for the drill bits.
🔹 **Advanced Technology:** With our unique vacuum brazed technology, this bit can withstand higher temperatures and cut through the hardest materials. It’s ideal for drilling clean holes in granite, ceramics, marble and more!
🔹 **Efficient Cooling:** Our dry diamond drill bit has an integrated wax lubricant that melts during drilling for optimal cooling. For extra cooling, use our specially designed WAX Paint and Tile.
🔹 **Simple and Accurate Drilling:** Follow our step-by-step instructions to drill clean and accurate holes every time. With minimal pressure and the right technique, you’ll achieve perfect results every time.
🔹 **Safety first:** Be careful when using the drill bit. Our design ensures longevity, but proper use is key to avoid overheating.
🔹 **Warranty:** We stand behind the quality of our products. Should you face challenges or not be satisfied, we offer easy replacement or full refund.
🔹**Don’t miss the chance to experience the best drill bit on the market. With the 6MM Vacuum Diamond Drill Bit, precision drilling is a breeze!**
Steps to drill clean and accurate holes:
1. Start drilling the hole at an angle of approx. 45 degrees to the surface, so the drill has a chance to start and prevents the drill from slipping
2. Slowly move the bit to a more upright position and swing the bit in a circular motion
3. No need to apply much pressure, let the bit do the work, you will feel the bit break through the back of the glass or tile when the hole is finished
4. Be careful when using them, as they can become shiny and burn out if used too quickly
Recommendations for a long crown life:
dry drilling, with wax
By using an angle grinder with speed control,
Circular movements are recommended when drilling – this will ensure better cooling,
Side valves should be cleaned and checked every time before drilling,
The maximum operating speed is 11,000 rpm. To extend the life of the drill bit and the accuracy of drilled holes, do not exceed the max. speed.